Water Purification Accessories and Replacement Parts
Ace Glass, Inc. 24/40 arsenic test chimney tube, #5 O-ring joint
24/40 Arsenic limit test capillary chimney tube with a pulled tip below 24/40 joint at bottom, and a #5 o-ring joint at top with hooks for springs.
Hach Company Pressure Regulator for Synergy Water Systems
Pressure Regulator for the Milli-Q and Synergy Water Systems. Regulates feedwater pressure. Required when feed water is greater than 0.5bar.
Ace Glass, Inc. 100L 400MM LOW-PROFILE FLASK
Jacketed, cylindrical kilo scale reaction flasks featuring removable flush seal valves, beaded pipe jacket inlet/outlets and bottom drain. Double-sided graduations facilitate left or right hand orientation. 10 to 20L flasks have 200mm Duran style o-ring grooved flanges while larger flasks have 300 to 400mm KF style flat flanges. All flask sizes thru 50 liter have all glass lower seals, larger flasks incorporate silicone lower seals. Low aspect ratio saves hood space. Temp range: -60°C to 200°C. Max jacket pressure: 8 psig.
MSC Parker L68CA-4-4 1/4" Tube OD x 1/4 NPTF Brass Compression Tube Male Connector P x M Ends
Parker L68CA-4-4 1/4" Tube OD x 1/4 NPTF Brass Compression Tube Male Connector P x M Ends
Hach Company Boiler Feed and Scale Test Kit, Model BSC-1, Drop Count Titration
Proper maintenance and economy of operation of modern boilers and cooling towers require a careful balance between water quality parameters and treatment chemicals. An economical test kit for monitoring scale formation in small industrial boilers, the BSC-1 Boiler Feed and Scale Test Kit uses drop count titration methods to determine levels of alkalinity, chloride, and hardness.
Ace Glass, Inc. 100L 450MM LOW-PROFILE FLASK
Jacketed, cylindrical kilo scale reaction flasks featuring removable flush seal valves, beaded pipe jacket inlet/outlets and bottom drain. Double-sided graduations facilitate left or right hand orientation. 10 to 20L flasks have 200mm Duran style o-ring grooved flanges while larger flasks have 300 to 400mm KF style flat flanges. All flask sizes thru 50 liter have all glass lower seals, larger flasks incorporate silicone lower seals. Low aspect ratio saves hood space. Temp range: -60°C to 200°C. Max jacket pressure: 8 psig.
Hach Company General Boiler Water Test Kit, Model AL-94 MG-L, Drop Count Titration
Proper maintenance and economy of operation of modern boilers and cooling towers require a careful balance between water quality parameters and treatment chemicals. Used for controlling boiler and cooling water treatement and checking corrosion, this test kit is an economical solution for the small boiler operator who needs to monitor alkalinity (5-400 mg/L), chloride (5-400 mg/L), hardness (0-2,500 mg/L), iron (0-4 mg/L), and pH (4-10).
Perkin Elmer US LLC High Sensitivity Quartz Cyclonic Spray Chamber with Matrix Gas Port for NexION 1000/2000
The spray chamber is an integral part of the sample introduction system responsible for filtering the sample mist to permit the appropriate droplet size distribution to reach the plasma. The baffled cyclonic spray chamber features a central transfer tube which acts as a secondary particle separator helping separate larger aerosol particles from the sample. This reduces solvent load in the plasma without compromising detection limits. The distance between the bottom of the baffle and the chamber wall is carefully controlled so that droplets cannot form on the bottom of the baffle. The advantage is smooth draining and improved precision. This spray chamber is included in the Organics Sample Introduction Kit (Orange) for NexION 1000/2000 (N8150031).
